A USB drive showing the wrong size in Windows is usually still carrying partitions from a bootable installer, such as a Windows or Linux USB, and File Explorer is only showing one small partition. To get the full capacity back, copy off any files you want to keep, then delete the old partitions and create one new one in Disk Management, or use diskpart clean if Disk Management will not let you. If the drive shows more space than it really has, or the numbers do not add up after a clean format, it may be a fake-capacity drive.
This guide covers each cause, starting with how to tell them apart, and walks through both fixes safely.
First, work out which problem you have
| What you see | Likely cause |
|---|---|
| A 64 GB stick shows as a few GB or a few hundred MB | Leftover partitions from a bootable USB, or unallocated space |
| A 64 GB stick shows about 57 to 59 GB | Normal. Windows counts in binary units, so it looks smaller. |
| A drive shows 2 TB but was very cheap and files go missing or corrupt | Fake capacity: the drive reports more space than it has |
| Format options only offer FAT32 at 32 GB | A limit of the Windows format dialog, not the drive |
The second row trips up a lot of people. Drive makers count 1 GB as 1,000,000,000 bytes, while Windows divides by 1,073,741,824, so every drive looks about 7 percent smaller in Windows. That is not lost space. Our guide on why a 1TB drive shows 931GB explains the math.
Check the drive in Disk Management
- Right-click Start and choose Disk Management.
- Find the USB drive in the lower half. It is usually labeled Removable, with its total size in the gray box on the left.
- Look at the boxes to the right. You will see one or more partitions and possibly a black Unallocated area.
If the gray box shows the full size but the partitions add up to much less, the space is there but hidden by the partition layout. That is the easy case, and the rest of this guide fixes it. If the gray box itself shows the wrong total, the drive is reporting a different size, which points to a fake drive or a faulty controller.
Step 1: Save anything on the drive
Both fixes below erase the drive completely. If the stick holds files you want, copy them to your PC first. A bootable installer stick usually holds nothing you need, since you can recreate it from the original download.
Step 2: Fix it in Disk Management
This works when Windows lets you delete the partitions on the drive.
- In Disk Management, right-click each partition on the USB drive and choose Delete Volume. Confirm each one.
- When the whole drive shows as one black Unallocated area, right-click it and choose New Simple Volume.
- Accept the maximum size, choose a drive letter, then pick a file system: exFAT for most sticks, NTFS for Windows-only use, or FAT32 if an older device needs it and the drive is 32 GB or smaller.
- Click Finish. The drive should now show its full capacity in File Explorer.
Check twice that you are working on the USB drive, not your internal drive. The disk number and size in the gray box are your best guide.
Step 3: Use diskpart if Delete Volume is grayed out
Partitions created by some bootable USB tools cannot be deleted in Disk Management. diskpart can remove everything in one go.
diskpart does not ask "are you sure?". Selecting the wrong disk and running clean will wipe it instantly. Unplug any other external drives before you start, and check the disk number against the size every time.
- Right-click Start and choose Terminal (Admin).
- Type
diskpartand press Enter. - Type
list disk. Find the USB drive by its size. Note its number, for example Disk 2. - Type
select disk 2, using your number. Then typelist diskagain: the selected disk has an asterisk next to it. Confirm it is the USB drive. - Type
clean. This removes every partition on the selected disk. - Type
create partition primary. - Type
format fs=exfat quick(orfs=ntfs). - Type
assignto give it a drive letter, thenexit.
If clean fails with an error saying the media is write-protected, the drive is locked or failing. See how to remove write protection from a USB drive.
Why the FAT32 option stops at 32 GB
When you format a drive larger than 32 GB in File Explorer, Windows offers exFAT and NTFS but not FAT32. The FAT32 file system can handle larger volumes, but the Windows format dialog does not offer it above 32 GB. For most uses exFAT is the better choice anyway, since FAT32 cannot store a single file larger than 4 GB. If a device such as an older car stereo insists on FAT32, use a 32 GB stick or a dedicated formatting tool.
When the drive reports more space than it has
Fake-capacity drives are common on marketplace sites. The controller is programmed to report, say, 1 TB, while the flash inside holds a fraction of that. The drive looks fine in Windows and accepts files, but anything written beyond the real capacity is lost or overwrites earlier files. Formatting does not fix it, because the drive lies about its size.
The only reliable test is to fill the drive with data and read it all back. Disk Detector includes a fake-capacity test for USB sticks and SD cards that does exactly this and tells you the real usable size. Run it on any new drive before you trust it with files, and see our guide on how to check if a USB flash drive is fake for the signs to look for.
Other causes
- Drive used in a camera, TV recorder or other device: some devices create their own partition layout. Copy files off and reformat on the PC.
- Encrypted or vendor security partition: some sticks come with a small locked partition for security software. Check the maker's instructions before removing it.
- Failing controller: if the size changes between plugs, or the drive shows 0 bytes or No Media, the controller is failing. Replace the drive.
Check the result
After reformatting, right-click the drive in File Explorer and choose Properties. Capacity should be close to the size on the label, minus the binary-units difference. Disk Detector shows every partition on the drive with its file system, size and status, and its speed test is a quick way to confirm a stick still performs as it should. If the size is right and the speed is normal, the drive is ready to use.
Frequently asked questions
Why does my USB drive only show 32GB?
It often still has partitions left over from a bootable installer, such as a Windows or Linux USB, which hide the rest of the space from File Explorer.
Does diskpart clean erase everything?
Yes. It removes all partitions on the selected disk, so back up first and double-check the disk number.
Can a USB drive show more space than it really has?
Yes. Fake drives report a false capacity, which a write and verify test exposes.
