Disk Detector
Windows 10 & 11 Buy license · $29.95
USB and SD cards

SD Card Not Showing Up on Windows 10 or 11? Here Is How to Fix It

SD card not showing up on your Windows PC? Check the reader, lock switch, drivers, drive letter and card format, and find out if the card has failed.

Updated 5 minute read The Disk Detector team

When an SD card is not showing up on Windows, the problem is usually the card reader rather than the card. Check that the card is fully inserted and unlocked, that the reader appears in Device Manager with a working driver, and that the card has a drive letter in Disk Management. If the card works in your camera or phone but not your PC, focus on the reader: older built-in readers cannot read newer SDXC cards, and Windows updates sometimes swap the reader's driver. If the card fails in every device, the card itself is likely damaged.

The steps below work for full-size SD cards, microSD cards in adapters, built-in laptop readers and USB card readers on Windows 10 and Windows 11.

Step 1: Check the basics

  1. Reinsert the card firmly. Built-in readers usually click when the card is seated. A card that sits slightly proud of the slot may not make contact.
  2. Check the lock switch. Full-size SD cards and microSD adapters have a small slider on the left edge. In the down (Lock) position the card is read-only, and some readers will not mount it properly. Slide it up.
  3. Clean the contacts. Gently wipe the gold contacts with a dry, lint-free cloth.
  4. Try a different adapter or reader. microSD adapters are cheap and fail often. A USB card reader is a quick way to bypass a built-in reader.
  5. Test the card in another device, such as the camera or phone it came from.

Step 2: Is the reader seen by Windows?

Press Win + X and open Device Manager. Built-in card readers appear in different places depending on the PC:

  • Memory technology devices (common for PCIe card readers in laptops)
  • Disk drives, often with "SD" or "Card Reader" in the name
  • Universal Serial Bus controllers, for readers connected over USB internally

If the reader has a yellow warning icon, right-click it and choose Update driver, or Uninstall device and then Action → Scan for hardware changes. If it is missing entirely, check your PC maker's support page for the card reader driver for your exact model, and check the BIOS or UEFI settings, as some laptops let you disable the card reader there.

If the card reader stopped working right after a Windows update, the update may have replaced its driver with a generic one. Installing the PC maker's own card reader driver usually fixes this.

Step 3: Check Disk Management

Press Win + X → Disk Management with the card inserted. Look for a Removable disk of about the right size. Because Windows uses binary units, a 64 GB card appears as roughly 59 GB.

What you seeWhat it meansWhat to do
Healthy partition, no drive letterWindows did not assign a letterRight-click → Change Drive Letter and Paths → Add
No MediaReader found, card not readReseat the card, try another reader
RAWFile system damaged or unsupportedDo not format yet; copy files first
UnallocatedNo partition foundOnly create a volume if the card is empty
Much smaller than expectedLeftover partitions, or a fake cardCheck the real capacity

Step 4: Check card type and reader compatibility

SD cards come in generations, and older readers do not support newer cards:

Card typeCapacityUsual file system
SDUp to 2 GBFAT16
SDHCOver 2 GB up to 32 GBFAT32
SDXCOver 32 GB up to 2 TBexFAT
SDUCOver 2 TB up to 128 TBexFAT

A reader built for SDHC may not detect a 64 GB or larger SDXC card at all. The fix is a newer USB card reader. The card's logo (SD, SDHC, SDXC) is printed on its label.

Step 5: The card is detected but not usable

Step 6: Find out if the card has failed

An SD card has probably failed if it is not detected in any reader or device, shows 0 bytes everywhere, or shows No Media in Disk Management on several PCs. Some failing cards also lock themselves to read-only. If it still reads, copy everything off now.

Disk Detector checks removable drives, including SD cards, the moment you plug them in. It tells you why a card is not recognized, whether it is write-protected or failing, and whether its real capacity matches the label, using a fake-capacity test. If the card is healthy but missing a drive letter, Disk Detector fixes that in one click.

Getting photos off a card that is acting up

If the card is detected but behaving oddly, such as dropping out during copies, showing some files but not others, or taking a long time to open folders, treat it as failing. Copy the most important folders first, a few at a time, rather than selecting everything at once. If a copy stalls on one file, skip it and move on, then come back to the problem files at the end. Copy to the PC's own drive rather than to another card or stick.

If photos have already gone missing, do not take new pictures on the card and do not format it. Recovery software has the best chance when nothing new has been written to the card since the files disappeared.

Keep your SD cards healthy

  • Eject before removing. Use Eject in File Explorer, or turn the camera off before taking the card out.
  • Format in the device that uses it. Cameras and drones expect their own folder layout.
  • Copy photos off regularly. An SD card is a working space, not an archive.
  • Buy from reputable sellers. Fake high-capacity cards are common on marketplace sites.

If a USB stick, rather than a card, is the problem, see our guide to a USB flash drive not recognized in Windows.

Frequently asked questions

Why does my SD card work in my camera but not my PC?

The card is fine, so look at the reader: a disabled or outdated card reader driver, an older reader that cannot handle SDXC cards, or a missing drive letter.

Can a card reader stop working after a Windows update?

Yes. An update can replace the reader driver. Check Device Manager and reinstall the driver from your PC maker if the reader has disappeared.

How do I know if my SD card is dead?

If it is not detected in several readers and PCs, or it shows 0 bytes, it has most likely failed.

Get three guides like this every month, plus software update notices.Subscribe →