To check if a USB flash drive or SD card is fake, you need to write data to its entire capacity and then read it all back to confirm every part stores what was written. Windows cannot tell you, because a fake drive's controller is programmed to report a capacity it does not have, and File Explorer simply trusts it. A full write-and-verify test reveals the real usable size. Warning signs before you test include a price far below similar drives, an unusually high capacity for its size, very slow write speeds, and files that turn corrupt once the drive fills up.
This guide explains how fake drives work, how to spot one, how to test it properly, and what to do if yours turns out to be fake.
How fake capacity drives work
Inside every flash drive is a memory chip and a small controller. On a fake, the controller has been reprogrammed to tell the computer it has, say, 1 TB, when the memory chip actually holds 32 GB or 64 GB.
Everything seems normal at first. Windows shows 1 TB, and you can copy files to it. But once you write past the real memory, the drive either discards the data or wraps around and overwrites earlier files. You only find out later, when photos open as gray blocks, videos stop halfway, or folders fill with garbled names. By then the original files may already be gone from your other devices.
Warning signs of a fake
- The price is far too low. A 1 TB or 2 TB USB stick at a fraction of the price of reputable brands' 256 GB models is almost certainly fake.
- An unusual capacity for the format. Tiny sticks claiming several terabytes, or microSD cards larger than any major brand sells.
- Very slow writes. Many fakes use cheap, slow memory and write at a few MB/s.
- Unbranded or oddly branded packaging, or a well-known brand sold through a marketplace seller at a price that brand never charges.
- Corruption once the drive is partly full. Files copied early are fine; later files are damaged.
A drive that shows slightly less than its label is normal. A 64 GB drive appears as about 59.6 GB in Windows because Windows counts in binary units. That is not a sign of a fake. Our explainer on why a 1TB drive shows 931GB covers the math.
Why a normal format or quick check does not catch it
File Explorer's Properties window and Disk Management both show the capacity the controller reports, so they show the fake size. A quick format only writes a fresh file system, which takes up a tiny amount of space. Even a full format can miss it, because writing zeros everywhere does not check whether each location holds unique data. Only a test that writes distinct, checkable data to every block and reads it back can tell the difference.
How to test a drive's real capacity
Use a write-and-verify capacity test
- Copy off anything on the drive that you need. The test fills all of its free space.
- Format the drive if it has leftover files, so the test can cover as much of the drive as possible.
- Run the capacity test. It writes test data across the whole drive, then reads it back and compares.
- Read the result. A genuine drive verifies every block. A fake shows errors from the point where the real memory runs out, which tells you its true usable size.
Disk Detector includes a fake-capacity test for USB flash drives and SD cards that reports the real usable size, so you know exactly what you have. It runs on Windows 10 and 11 as part of Disk Detector's removable drive checks.
Allow enough time
A full test writes the drive's entire claimed capacity, and fakes are often slow. At 10 MB/s, writing 1 TB takes over 27 hours. Most tests stop being useful long before that, since errors appear as soon as the real memory is used up, but plan for a long run on large drives.
The manual method
Without a dedicated tool, you can approximate the test by filling the drive with copies of a large file, such as a video, then checking the last copies. Open them, or compare them with the original using certutil -hashfile video.mp4 SHA256 on both files in Command Prompt. If the hashes of the later copies do not match the original, the drive is losing data. This takes time and is easy to get wrong, which is why a purpose-built test is better.
Genuine vs fake: what the results look like
| Check | Genuine drive | Fake drive |
|---|---|---|
| Capacity shown in Windows | Label size, in binary units | Label size, in binary units |
| Write-and-verify test | All data verifies | Errors after the real capacity |
| Write speed | Consistent with its rating | Often very slow |
| Files after filling the drive | All open correctly | Later files corrupt or missing |
What to do if your drive is fake
- Stop using it for anything important. Copy off any files you still need and check that they open.
- Request a refund. Most marketplaces treat fake capacity as an item not as described. Keep a screenshot of the test result.
- If you keep it, repartition it to its real size. Creating a partition smaller than the real capacity stops the wrap-around corruption. This erases the drive. Our guide to a USB drive showing the wrong size explains how to remove and recreate partitions with diskpart.
- Still treat it as unreliable. Fake drives tend to use low-grade memory that fails sooner than genuine drives.
Avoiding fakes in future
- Buy from the manufacturer's own store or a well-known retailer, not third-party marketplace sellers with unusually low prices.
- Be suspicious of capacities that major brands do not sell in that form factor.
- Test every new card or stick before trusting it with photos or backups.
- If photos on an SD card have already gone bad, see our guide to fixing a corrupted SD card.
Frequently asked questions
Why does a fake USB drive show the full capacity in Windows?
Its controller is programmed to report a false size. Windows trusts that value, so the problem only appears once you write past the real memory.
Can a fake flash drive be fixed?
Partly. You can repartition it to its real size so it stops corrupting files, but it will never hold what the label claims.
Is a fake capacity test safe for my files?
Run it on an empty or backed-up drive. A proper test fills the drive with test data to check every part of it.
