Disk Detector
Windows 10 & 11 Buy license · $29.95
Buying guide

SSD vs HDD Speed: Real-World Read, Write and Boot Times Compared

SSD vs HDD speed compared: typical read and write numbers for hard drives, SATA SSDs and NVMe, what you feel day to day and how to test your own drives.

Updated 4 minute read The Disk Detector team

For large files, a SATA SSD is roughly three to five times faster than a hard drive, and an NVMe SSD can be ten to fifty times faster. The bigger difference, though, is in the small random reads that make a PC feel quick: an SSD answers in a fraction of a millisecond, while a hard drive has to physically move its read head and wait for the disk to spin, which takes several milliseconds every time. That is why moving Windows from a hard drive to any SSD makes boots, program launches and searches dramatically faster, even though the step from a SATA SSD to NVMe is much less noticeable day to day.

Below are typical numbers for each drive type, what they mean in practice, and how to measure your own drives.

Typical speeds compared

These are typical ranges for current consumer drives. Exact figures vary by model, capacity and how full the drive is, so check the specifications for any drive you are considering.

Drive typeSequential readSequential writeAccess time
Laptop hard drive, 5400 rpmabout 80 to 140 MB/sabout 80 to 140 MB/s12 to 15 ms
Desktop hard drive, 7200 rpmabout 120 to 280 MB/sabout 120 to 280 MB/s8 to 12 ms
SATA SSDup to about 550 MB/sup to about 520 MB/sunder 0.1 ms
NVMe SSD, PCIe 3.0up to about 3,500 MB/sup to about 3,000 MB/sunder 0.1 ms
NVMe SSD, PCIe 4.0up to about 7,000 MB/sup to about 6,500 MB/sunder 0.1 ms
NVMe SSD, PCIe 5.0above 10,000 MB/s on fast modelsabove 10,000 MB/s on fast modelsunder 0.1 ms

A few points that are easy to miss:

  • SATA caps SSDs at around 550 MB/s. The SATA III connection tops out at 6 Gb/s, so every SATA SSD lands in roughly the same place for big files.
  • Hard drives slow down toward the end. The outer edge of a disk passes under the head faster than the inner edge, so a hard drive can be half as fast on its last files as its first.
  • SSD write speeds can drop during huge copies. Many SSDs write to a fast cache first. Once it fills, sustained write speed falls, sometimes a long way on lower-cost drives.

Why random speed matters more

Sequential speed is about copying one big file. Most of what a PC does is different: starting Windows, opening programs and loading settings means reading thousands of small files scattered across the drive. For each one, a hard drive has to move its head and wait for the right part of the disk to come around. That delay adds up.

A hard drive can typically handle around a hundred or so small random reads per second. Even a modest SSD handles many thousands. For small random reads, a hard drive often manages only a megabyte or two per second, while an SSD manages tens of megabytes per second or more. This is the number behind the "it feels like a new PC" effect of upgrading to an SSD, and it is why a hard drive shows 100% disk usage in Task Manager while barely moving any data. Our guide to 100% disk usage in Windows 11 covers that symptom.

What you notice day to day

TaskHard drive to SATA SSDSATA SSD to NVMe
Starting WindowsBig improvementSmall improvement
Opening programsBig improvementSmall improvement
Searching files, Windows updatesBig improvementSmall improvement
Game loadingBig improvementSmall to moderate
Copying large video filesModerate to bigBig, if the other drive is also fast

A copy only runs as fast as the slowest drive involved. Copying from an NVMe SSD to a USB hard drive runs at hard drive speed, however fast the source is.

Connections can hide a drive's speed

External drives are limited by their connection:

ConnectionRealistic top speed
USB 2.0about 30 to 40 MB/s
USB 3.2 Gen 1 (5 Gbps)about 400 to 450 MB/s
USB 3.2 Gen 2 (10 Gbps)about 900 to 1,000 MB/s

An external hard drive will not saturate USB 3, but an external SSD on a USB 2.0 port loses almost all its advantage. If an external drive seems slow, try a different port and cable before blaming the drive.

How to test your own drives

Windows includes a basic benchmark. Open Terminal (Admin) and run winsat disk -drive c, replacing c with the drive letter you want to test. It reports sequential and random speeds in MB/s. Run it on each drive to see the difference for yourself.

Disk Detector includes a speed benchmark that measures read and write speeds and compares them with what the drive should manage. That comparison is the useful part: a SATA SSD reading at 250 MB/s or a hard drive far below its rating points to a slow port, a bad cable or a failing drive rather than normal behavior. See how to test hard drive speed on Windows for how to get reliable results.

Run benchmarks on healthy drives only. A drive with bad sectors or SMART warnings should be backed up, not stress-tested. Check its health first.

Speed is not everything

  • Cost per terabyte: hard drives remain much cheaper for large capacities, which makes them a sensible choice for backups, media libraries and archives.
  • Durability: SSDs have no moving parts, so they cope better with knocks and drops, which matters in laptops.
  • Wear: SSDs have a rated write endurance, but most home users never come close to it. Our guide on how long SSDs last explains the numbers.
  • Noise and power: SSDs are silent and use less power.

A common setup gets the best of both: an SSD for Windows, programs and current projects, and a large hard drive for backups and bulk storage. Whichever drives you use, Disk Detector reads the health of both kinds, so you can see SSD wear and hard drive sector counts side by side.

Frequently asked questions

How much faster is an SSD than a hard drive?

A SATA SSD is about three to five times faster for large files, and far faster for the small random reads that make a PC feel quick.

Is an NVMe SSD worth it over SATA?

For big file transfers, yes. For everyday use the difference is smaller than the numbers suggest.

Are hard drives still worth buying?

Yes, for large backup and storage drives where cost per terabyte matters more than speed.

Get three guides like this every month, plus software update notices.Subscribe →