Disk Detector
Windows 10 & 11 Buy license · $29.95
Space and speed

How to Test Hard Drive and SSD Speed on Windows (and What Is Normal)

Test hard drive speed on Windows with built-in tools, compare read and write results with normal speeds for HDDs and SSDs, and find slow ports or cables.

Updated 5 minute read The Disk Detector team

To test hard drive speed on Windows without installing anything, open Terminal (Admin) and run winsat disk -drive c, replacing c with the drive letter you want to test. The results include sequential read and write speeds in MB/s, which you can compare with what that type of drive should manage. You can also watch real-world speed in Task Manager → Performance while copying a large file. A drive that tests well below its expected speed is usually on a slow port or cable, nearly full, overheating, or developing faults.

This guide covers each method, gives you a table of normal speeds for hard drives, SSDs and USB drives, and explains what to do if your results are low.

Method 1: winsat (built in)

The Windows System Assessment Tool is still included in Windows 10 and Windows 11, even though Windows no longer shows its scores.

  1. Right-click Start and choose Terminal (Admin).
  2. Type winsat disk -drive d (use your drive letter, without the colon) and press Enter.
  3. Wait a minute or two while it runs.
  4. Look for the lines Disk Sequential 64.0 Read and Disk Sequential 64.0 Write. These are your large-file speeds in MB/s. The Random 16.0 Read line shows small-file performance.

winsat writes a temporary test file, so the drive needs some free space. It is safe to run and does not touch your files.

Method 2: Task Manager during a real copy

  1. Find a large file, ideally several gigabytes, such as a video or disk image.
  2. Press Ctrl + Shift + Esc to open Task Manager and go to Performance.
  3. Select the disk you are testing. The panel shows its type (HDD or SSD), active time, and read and write speeds.
  4. Copy the file to or from the drive and watch the speeds. In the File Explorer copy window, click More details to see a speed graph too.

This shows real-world performance but is affected by the other drive involved. Copying from a fast SSD to a slow USB stick tests the stick; copying between two hard drives tests whichever is slower.

What speed should you expect?

These are typical sequential speeds, the kind you see copying large files. Exact figures vary by model.

Drive and connectionTypical read speed
USB flash drive on USB 2.020 to 40 MB/s
External hard drive on USB 2.030 to 40 MB/s
Laptop hard drive, 5,400 RPM80 to 140 MB/s
Desktop hard drive, 7,200 RPM150 to 250 MB/s
External hard drive on USB 3100 to 200 MB/s (limited by the drive)
SATA SSD500 to 560 MB/s
Portable SSD on USB 3.2 Gen 2 (10 Gbps)About 1,000 MB/s
NVMe SSD, PCIe 3.0 x4Up to about 3,500 MB/s
NVMe SSD, PCIe 4.0 x4Up to about 7,000 MB/s
NVMe SSD, PCIe 5.0 x4Up to about 14,000 MB/s

Hard drives are fastest at the start of the disk and slow down toward the end, often to about half their peak speed. Write speeds on cheap flash drives can be far lower than their read speeds. For a broader comparison, see SSD vs HDD speed.

Why your results might be low

The port or cable

The most common cause of a slow external drive is a USB 2.0 connection. A USB 3 drive on a USB 2.0 port or cable is limited to about 30 to 40 MB/s in practice. USB 3 ports are often blue or marked SS. Hubs and front-panel ports can be slower too. Internal SATA drives on an older SATA II port top out around 280 MB/s, which only matters for SSDs.

The M.2 slot

Not every M.2 slot runs at full speed. A slot connected through the chipset, or one that runs at fewer PCIe lanes or an older PCIe generation, caps an NVMe drive's speed. Your motherboard manual lists each slot's speed.

A full or hot SSD

SSDs slow down noticeably when they are nearly full, and NVMe drives throttle when they get hot. Many SSDs also write very fast into a cache area and then slow sharply once a long transfer fills it. If your SSD is slower than it should be, our guide to an SSD running slow covers the fixes.

SMR hard drives

Some hard drives use shingled magnetic recording (SMR), which is fine for reading but can slow to a crawl during long sustained writes. This is normal for those drives.

A failing drive

A hard drive with weak areas retries reads, which shows up as erratic speed, sudden drops to near zero, and Task Manager showing 100 percent active time while transferring very little. If your PC is constantly showing full disk usage, see our guide to 100% disk usage in Windows 11, and check the drive's health.

A quicker way to test and compare

Disk Detector includes a speed benchmark that measures read and write speeds and compares them with what the drive should manage. That comparison is the useful part: a number on its own does not tell you whether 120 MB/s is good, but knowing your drive should do 500 MB/s does. It is handy for spotting a slow USB port, a bad cable or a failing disk.

Because Disk Detector also reads SMART health, you can see in one place whether a slow drive is simply on the wrong port or is showing warning signs such as reallocated sectors. It runs a read-only surface scan too, with a live map that highlights slow areas of the disk.

Tips for a fair test

  • Close other programs, especially anything syncing, backing up or scanning in the background.
  • Plug laptops in. Battery saving modes can reduce drive performance.
  • Run the test two or three times and use the typical result.
  • Do not benchmark SSDs constantly. Each test writes data, which adds a little wear. A few runs when you need them is fine.
  • Test new drives on arrival so you have a baseline to compare with later.

Keep a note of your results with the date. A drive that benchmarked at 180 MB/s when new and now manages 60 MB/s on the same port has changed, and that change is worth investigating even if the drive still seems to work.

Frequently asked questions

What is a good read speed for an SSD?

A SATA SSD tops out around 500 to 560 MB/s. NVMe SSDs range from about 2,000 MB/s to over 7,000 MB/s depending on the PCIe generation.

Why is my external drive so slow?

It may be on a USB 2.0 port or cable, which limits it to about 30 to 40 MB/s in practice. Use a USB 3 port, usually marked blue or SS.

Does a speed test damage a drive?

No. A normal benchmark writes a temporary test file and deletes it. It adds a small amount of wear to an SSD, so you do not need to run it daily.

Get three guides like this every month, plus software update notices.Subscribe →