Windows' built-in disk tools are good at managing drives: Disk Management handles partitions and drive letters, chkdsk repairs file systems, and Settings shows space use. What they mostly do not do is diagnose hardware. They cannot show detailed SMART health for most drives, explain why a drive is missing, run a read-only surface scan or warn you as a drive starts to wear. Dedicated drive diagnostic software fills those gaps. If your drives work and you just need to partition or clean them, Windows is enough. If a drive is missing, slow, noisy or you want early warning of failure, you need more.
This guide goes through what each Windows tool can and cannot tell you, and where dedicated software genuinely adds something.
What the built-in tools do
| Windows tool | Good for | Does not tell you |
|---|---|---|
| Disk Management | Partitions, drive letters, initializing, bringing disks online, formatting | Whether the hardware is healthy, or why a drive is in a particular state |
| File Explorer → Properties → Tools → Error checking | A quick file system check | Anything about bad sectors in unused space or drive health |
| chkdsk | Repairing file system errors; /r scans for bad sectors | SMART readings, wear or temperature; it also writes changes as it repairs |
| Settings → Storage | Space use by category, cleanup, Storage Sense | Folder-level detail in the "Other" category |
| Settings → Disks & volumes → Properties | NVMe drive health: remaining life, spare, temperature | The same information for SATA hard drives and most SATA SSDs |
PowerShell Get-PhysicalDisk | Overall Healthy, Warning or Unhealthy status | Which reading is the problem, or early changes before a drive fails its threshold |
| Optimize Drives | Defragmenting hard drives, TRIM for SSDs | Health or speed problems |
| Event Viewer | Logged disk errors such as event ID 7 and 153 | Which physical drive they came from in plain terms, or what to do |
winsat disk | Basic read and write benchmark | Whether the result is normal for that drive |
These are capable tools, and every guide on this site uses them where they are the right answer. Our guide on how to run chkdsk in Windows 11 and the Disk Management status reference show how to get the most out of them.
Where Windows tools fall short
Health
Windows reads SMART data but only exposes the final pass or fail for most drives. A hard drive can build up dozens of reallocated sectors while Windows still reports it as Healthy. The readings that give early warning are hidden.
Missing drives
When a drive does not appear in File Explorer, Windows does not tell you why. You have to check Disk Management, Device Manager, the BIOS and diskpart yourself and work out whether it is a drive letter, an offline disk, a driver or a dead drive.
Safe scanning
The only built-in way to scan every sector is chkdsk /r, which is a repair tool. It changes the file system as it goes, which is the wrong order on a drive that may be failing: you want to know how bad things are, and save your files, before anything is written.
Warnings over time
Apart from late notifications for some NVMe drives, Windows does not watch drive health in the background or tell you when readings change.
Removable drive checks
Windows has no way to test whether a USB stick or SD card really has the capacity it reports.
What dedicated drive diagnostic software adds
Drive diagnostic software generally falls into two groups: technical SMART utilities that show the raw numbers, and tools that interpret those numbers and give advice. Disk Detector is in the second group. It is built to do the two jobs Windows leaves open: explaining why a drive is missing, and translating SMART readings into plain English.
| Task | Built-in Windows tools | Disk Detector |
|---|---|---|
| Explain why a drive is missing | Manual checks across several tools | Finds hidden drives and names the cause, with one-click fixes where safe |
| SMART health | Pass or fail; NVMe detail in Settings | Full readings for HDD, SSD and NVMe, rated Good, Caution or Bad with reasons |
| Bad sector scan | chkdsk /r, which also writes repairs | Read-only surface scan with a live map |
| Temperature and SSD life left | NVMe only, as a snapshot | All supported drives, with an estimate of SSD life left |
| Fake-capacity USB and SD test | Not available | Included |
| Background alerts | Limited | Scheduled checks with desktop alerts for warning signs, heat and low space |
| Printable report | Not available | PDF or text report of every drive |
| Partitions and repairs | Disk Management and chkdsk | Shows every partition and checks file systems; Windows tools remain useful alongside it |
One thing neither does is recover deleted files. That needs a separate recovery tool.
When Windows tools are enough
- You need to create, resize or delete partitions.
- A drive shows in Disk Management with an obvious fix, such as no drive letter.
- You want to clean up space or turn on Storage Sense.
- Your only drive is NVMe and you just want a quick look at its health in Settings.
When dedicated software is worth it
- A drive is missing and the reason is not obvious. See our guide to an external hard drive not showing up for how many places you otherwise have to check.
- A drive is clicking, freezing or slowing down and you need to know whether it is failing before you run any repair.
- You keep important files on hard drives or SATA SSDs and want early warning.
- You buy used drives or cheap USB sticks and want to check them before trusting them.
- You need a written record for a warranty claim, IT records or selling a PC.
Use them together
The best approach combines both. Use diagnostic software to find out what is wrong and whether the hardware is sound, back up anything at risk, then use Windows' tools to repair, partition or format. That order, diagnose, protect, then change, is what keeps your files safe. Read-only checks come first; anything that writes to a drive comes after your data is somewhere else.
Frequently asked questions
Can Disk Management tell if a drive is failing?
No. It shows partitions and status, not hardware health.
Is chkdsk a hard drive health test?
No. It checks the file system and can find bad sectors, but it does not read SMART health or wear.
When do I need more than Windows tools?
When a drive is missing for no clear reason, when you want SMART values explained, or when you want alerts and reports.
