Disk Detector
Windows 10 & 11 Buy license · $29.95
Missing drives

Drive Shows in Disk Management but Not in File Explorer: How to Fix It

Your drive shows in Disk Management but not in File Explorer? Fix missing drive letters, hidden partitions, RAW volumes and disabled automount on Windows.

Updated 4 minute read The Disk Detector team

If a drive shows in Disk Management but not in File Explorer, the drive is connected and working at the hardware level, and the problem is how Windows presents it. The usual cause is that the partition has no drive letter, and adding one in Disk Management fixes it in seconds. Other causes include a letter clash with a network drive, a partition marked as hidden, automount being turned off, and a file system Windows cannot read, such as a drive formatted on a Mac or Linux PC. This guide shows you how to tell which one you have and fix it safely.

The good news: because Windows can see the disk, your files are very likely still there. None of the fixes below erase data unless clearly marked.

Read what Disk Management is telling you

Press Win + X and choose Disk Management. Find your drive by its size, then look at the partition bar on the right and the text inside it.

Partition showsLikely causeGo to
Healthy, file system NTFS, exFAT or FAT32, no letterMissing drive letterFix 1
Has a letter, but File Explorer shows a network drive thereLetter clashFix 2
Healthy, letter will not stick after restartHidden attribute or automount offFixes 3 and 4
Healthy (Primary Partition) with no file system listedMac or Linux file systemFix 5
RAWDamaged file systemFix 6
Unallocated or Not InitializedNo readable partitionFix 6
EFI System Partition or Recovery PartitionHidden on purposeLeave it alone

Fix 1: Add a drive letter

  1. Right-click the partition bar (not the disk label on the left).
  2. Choose Change Drive Letter and Paths.
  3. Click Add, choose a letter from the drop-down list, and click OK.

The drive opens in File Explorer immediately. Adding a letter does not change any files. For more on choosing and fixing letters, including with diskpart, see our guide on how to assign a drive letter in Windows.

Do not add letters to the EFI System Partition or the Recovery Partition. Windows hides them deliberately, and changing them can cause startup or recovery problems.

Fix 2: Resolve a drive letter clash

Windows can assign a USB drive a letter that is already used by a mapped network drive. Disk Management shows the letter, but File Explorer shows the network share in its place. Right-click the partition, choose Change Drive Letter and Paths, click Change, and pick a letter that is not in use. Letters later in the alphabet, such as R to W, are least likely to clash.

Fix 3: Clear a hidden partition attribute

Partitions can carry flags that tell Windows not to show them or not to assign them a letter automatically. Drives prepared by some backup tools, recovery tools or other operating systems can end up with these set. You can clear them with diskpart:

  1. Right-click Start, choose Terminal (Admin), type diskpart and press Enter.
  2. Type list volume and find your drive's volume number by its size.
  3. Type select volume 5, replacing 5 with your volume number.
  4. Type attributes volume to see the current flags.
  5. If Hidden or No Default Drive Letter says Yes, type attributes volume clear hidden and attributes volume clear nodefaultdriveletter.
  6. Type assign to give it a letter, then exit.

Double-check the volume number before every command. Selecting the wrong volume and changing its flags is not destructive, but it can hide a drive you need.

Fix 4: Turn automount back on

Automount is the Windows feature that gives new volumes a drive letter. Some disk utilities and system images turn it off, which means every new drive you connect appears in Disk Management with no letter. To check and fix it, open diskpart as above and type automount. If it says automatic mounting is disabled, type automount enable, exit, and reconnect the drive.

Fix 5: A drive from a Mac or Linux PC

Windows reads NTFS, exFAT and FAT32. It cannot read APFS or HFS+ (used by Macs) or ext4 (used by Linux). These partitions appear in Disk Management as healthy but with no file system listed, and no letter is assigned because there is nothing Windows can open.

If you need the files, do not format the drive. Copy the files off on the original type of computer, or use software that can read that file system. If you want a drive that works on Windows and Mac, exFAT is the usual choice. Our comparison of NTFS vs exFAT vs FAT32 explains the trade-offs.

Fix 6: RAW, unallocated or not initialized

These mean Windows cannot find a readable file system or partition table, so there is nothing to assign a letter to. Disk Management will offer to format the partition or initialize the disk. Both actions hide your existing files.

  • For a RAW partition, read our guide to fixing a RAW drive without formatting.
  • For Not Initialized or unexpected Unallocated space on a drive that had files, stop and check the drive's health first. Moving a drive between a USB enclosure and a direct SATA connection can cause this, and putting it back in its original enclosure often brings the partitions back.

Find the cause without the guesswork

Working out which of these six problems you have can mean checking Disk Management, diskpart flags and file system types one by one. Disk Detector finds every drive and partition connected to your PC, including hidden ones, and shows each with its file system, size and status. It tells you exactly why a drive is not showing, whether it is a missing letter, an offline disk, a RAW or unreadable file system, or something else, and offers a one-click fix where one is safe.

Disk Detector also lists hidden recovery and EFI partitions with their size and status, so you can see what every partition on a drive is, and it clearly marks anything that could affect your data before you run it.

Frequently asked questions

Why does my drive have no drive letter?

Windows sometimes skips assigning a letter, for example when the letter it wants is taken by a network or card reader drive, or when automount has been turned off.

Is it safe to add a drive letter to a partition?

Yes, for normal data partitions. Do not add letters to EFI or recovery partitions, as they are hidden on purpose.

Why does a drive from a Mac or Linux PC not show in File Explorer?

Windows cannot read APFS, HFS+ or ext4, so it shows the partition in Disk Management but gives it no letter. Do not format it if you need the files.

Get three guides like this every month, plus software update notices.Subscribe →