Disk Detector
Windows 10 & 11 Buy license · $29.95
Reference

NTFS vs exFAT vs FAT32: Which File System to Use for Each Drive

NTFS vs exFAT vs FAT32 compared: file size limits, compatibility with Mac, TVs and consoles, and which file system to choose for each drive you own.

Updated 5 minute read The Disk Detector team

Use NTFS for internal drives and any external drive used only with Windows PCs. Use exFAT for USB sticks, SD cards and external drives you share between Windows, Mac and other devices, because it has no practical file size limit and almost everything reads it. Use FAT32 only for older devices that need it, such as some car stereos, older cameras and small boot drives, and remember it cannot store a single file larger than 4 GB.

That covers most cases. The comparison and notes below help with the rest, including how to check which file system a drive uses and how to change it without losing your files.

Quick comparison

NTFSexFATFAT32
Largest single fileEffectively unlimited for everyday useEffectively unlimited for everyday use4 GB minus 1 byte
Largest volume Windows will formatMany terabytesMany terabytes32 GB in the Windows format dialog
WindowsRead and writeRead and writeRead and write
macOSRead only without extra softwareRead and writeRead and write
LinuxRead and write on modern versionsRead and write on modern versionsRead and write
Cameras, TVs, consoles, car stereosVaries, often limitedMost modern devicesAlmost all, including older ones
Journaling (crash protection)YesNoNo
Permissions, encryption, compressionYesNoNo
Best forWindows system and data drivesShared external drives and large cardsOlder devices and small boot sticks

NTFS: the Windows file system

NTFS is what Windows installs on and what it uses for internal drives. Its big advantage is journaling: before NTFS changes its own records, it notes what it is about to do. If the power fails or the PC crashes mid-write, Windows can use that journal to bring the file system back to a consistent state, which makes corruption much less likely than on FAT-based systems.

NTFS also supports file permissions, BitLocker encryption, compression and very large files and drives. The catch is compatibility: a Mac can read NTFS drives but not write to them without extra software, and many TVs, cameras and older devices cannot use NTFS at all.

Choose NTFS for: your C: drive, second internal drives, and external drives that only ever connect to Windows PCs, including backup drives.

exFAT: the cross-platform choice

exFAT was designed for flash storage and large removable drives. It removes FAT32's 4 GB file limit and works on Windows, macOS, modern Linux, Android and most recent cameras, TVs and game consoles. It is the standard file system for SDXC cards, which is why cards of 64 GB and larger come formatted with it.

Its weakness is that it has no journaling. If you unplug an exFAT drive while it is writing, the file system is more likely to be damaged than an NTFS drive in the same situation. That makes safe removal especially important. If you have ever seen "You need to format the disk before you can use it" on a USB drive, an interrupted write on exFAT or FAT32 is a common cause.

Choose exFAT for: USB sticks and external drives you use with both Windows and Mac, SD cards of 64 GB and larger, and drives for devices that support it.

FAT32: maximum compatibility, with limits

FAT32 is old, simple and supported by almost everything that has a USB port. Its limits are what usually push people away from it:

  • 4 GB file limit. Large videos, disk images and game files will not copy. Windows reports that the file is too large for the destination file system, even with plenty of space free.
  • 32 GB format limit in Windows. The Windows format dialog does not offer FAT32 for larger drives, though the file system itself can be bigger.
  • No journaling, so it shares exFAT's vulnerability to unsafe removal.

Choose FAT32 for: older devices that do not support exFAT, small USB sticks for firmware updates, and some boot drives, since UEFI firmware is required to read FAT32 but not always exFAT or NTFS.

How to check a drive's file system

  1. Open File Explorer and go to This PC.
  2. Right-click the drive and choose Properties.
  3. The File system line on the General tab shows NTFS, exFAT or FAT32.

Disk Management shows the file system of every partition too. If it says RAW, Windows cannot recognize the file system at all, which usually means damage rather than an unusual format. See how to fix a RAW drive without formatting before you do anything else to it.

Disk Detector shows every partition on every drive, including hidden recovery and EFI partitions, with its file system, size and status, and flags RAW or damaged file systems so you can check them for errors.

How to change the file system

Formatting (erases the drive)

The normal way to change file system is to reformat. This erases everything on the drive, so copy your files somewhere else first.

  1. Copy all files you want to keep to another drive and check they open.
  2. In File Explorer, right-click the drive and choose Format.
  3. Choose the file system, leave Allocation unit size on Default, and give the drive a name.
  4. Click Start, then copy your files back.

Converting FAT32 to NTFS (keeps your files)

Windows can convert a FAT32 drive to NTFS in place with the convert command, for example convert E: /fs:ntfs in Terminal (Admin). It keeps your files, but it is one-way: there is no built-in way to convert back. Back up first anyway, since a power cut during conversion could leave the drive damaged. There is no in-place conversion to or from exFAT.

Common questions in practice

  • "File too large" copying to a USB stick: the stick is FAT32. Back up its contents and reformat as exFAT.
  • Mac cannot save to my external drive: the drive is NTFS. Use exFAT for drives you share with a Mac.
  • TV does not see my drive: check the TV's manual for supported file systems. Many accept FAT32 and some accept NTFS or exFAT.
  • Which is fastest? For everyday use the difference is small. The connection and the drive matter far more than the file system.

Whichever you choose, the file system does not protect you from hardware failure. Disk Detector's health checks work the same on NTFS, exFAT and FAT32 drives, because they read the drive itself rather than the files on it.

Frequently asked questions

What is the maximum file size on FAT32?

4 GB minus 1 byte, which is why large video files will not copy to FAT32 drives.

Is exFAT reliable for external drives?

Yes for compatibility, but it lacks journaling, so unplugging during a write is riskier than with NTFS.

Can a Mac read NTFS drives?

A Mac can read NTFS but not write to it without extra software. exFAT works on both.

Get three guides like this every month, plus software update notices.Subscribe →