Disk Detector
Windows 10 & 11 Buy license · $29.95
Reference

Disk Management Status Meanings: Every Disk and Volume Status Explained

Disk Management status meanings explained: Healthy, Unallocated, Not Initialized, Offline, RAW, No Media, Foreign and more, with what to do about each.

Updated 5 minute read The Disk Detector team

Disk Management shows two kinds of status: a disk status on the left of each row (such as Online, Offline, Not Initialized or No Media) and a volume status inside each partition box (such as Healthy, Unallocated or RAW). Disk status tells you whether Windows can talk to the drive at all. Volume status tells you whether it can read the partition and its file system. Neither one tells you whether the drive's hardware is healthy, which needs a SMART check.

This reference lists every status you are likely to see, what it means and what to do about it, with a warning wherever the obvious fix would erase data.

Where to find the status

Right-click the Start button and choose Disk Management. The lower half of the window shows one row per physical disk. The gray box on the left of each row shows the disk number, type (Basic or Dynamic), size and disk status. The colored boxes to the right are partitions, each with a label, size, file system and volume status. The top half lists volumes with a Status column that repeats the volume status.

Disk status meanings

Disk statusWhat it meansWhat to do
OnlineNormal. Windows can access the disk.Nothing. Check volumes if a drive letter is missing.
OfflineWindows sees the disk but is not using it. Often a policy or signature conflict.Right-click the gray box and choose Online.
Offline with "policy set by administrator"The SAN policy or a signature collision with another disk kept it offlineBring it online in Disk Management or diskpart
Not Initialized (often with Unknown)Windows cannot find a valid MBR or GPT partition tableNew drive: initialize it. Drive with data: do not initialize until your files are recovered.
No MediaA reader or USB bridge is present, but no storage behind itInsert the card, or test the drive in another port. A USB stick showing this may have failed.
UnreadableThe disk responds but Windows cannot read it, often due to I/O errorsTry Action → Rescan Disks, check the connection and the drive's health
ForeignA dynamic disk moved from another PCRight-click and choose Import Foreign Disks
MissingA dynamic disk that was part of this PC is disconnected or damagedReconnect it, then reactivate
Online (Errors)A dynamic disk has had I/O errorsReactivate the disk, then check its health and back up

The two you will meet most often on a problem drive are Not Initialized and Offline. Our guides to a disk that is Unknown and Not Initialized and the disk offline because of a policy set by an administrator walk through each one step by step.

Initializing a disk writes a new, empty partition table. If the disk had files on it and lost its partition table, initializing makes recovery harder. Only initialize a disk you know is new or empty.

Volume status meanings

Volume statusWhat it meansWhat to do
HealthyThe partition and file system are readableNothing. If it has no drive letter, assign one.
UnallocatedSpace with no partition on itCreate a new simple volume if it is genuinely empty space
RAWA partition exists, but Windows cannot recognize its file systemRecover files first; format only once they are safe
FailedThe volume cannot be started, often after disk damageCheck the disk is online and healthy, then reactivate
FormattingA format is in progressWait for it to finish
Healthy (At Risk)A dynamic volume is readable but its disk has had errorsBack up and check the disk
Resynching / RegeneratingA mirrored or RAID-5 dynamic volume is rebuildingLeave it to finish

A volume that shows RAW is a common source of the "You need to format the disk" prompt. Do not accept that prompt if the drive had files on it. See our guide to fixing a RAW drive without formatting.

Words in brackets after Healthy

Windows adds descriptions to Healthy to show what a partition is used for. These are informational, not problems:

  • Boot: the partition Windows is running from, usually C:.
  • System: holds the files needed to start the PC. On GPT disks this is the EFI System Partition.
  • Page File: holds the Windows paging file.
  • Crash Dump: where Windows saves memory dumps after a crash.
  • Active: the boot partition on an MBR disk.
  • Primary Partition: a standard partition on an MBR disk.
  • Basic Data Partition: a standard data partition on a GPT disk.
  • EFI System Partition: a small FAT32 partition used to boot UEFI PCs. Do not delete it.
  • Recovery Partition: holds the Windows Recovery Environment. Do not delete it unless you understand the consequences.
  • OEM Partition: created by your PC maker, often for its own recovery tools.

"Healthy" does not mean the drive is healthy

This catches a lot of people out. Healthy in Disk Management only means the partition is readable right now. A drive can show Healthy while it is building up bad sectors, running hot or wearing out. Disk Management does not read SMART data at all.

To check the hardware, you need a tool that reads the drive's own health log. Disk Detector reads SMART for hard drives, SSDs and NVMe drives and rates each one Good, Caution or Bad, with the reasons explained. It also lists every partition, including hidden recovery and EFI partitions, with its file system, size and status, so you can see the partition picture and the hardware picture side by side.

Missing drives that do not appear at all

If a drive does not appear in Disk Management, no status applies, and the problem is lower down: the cable, port, power, a driver, or the drive itself. A drive missing from Disk Management may also be missing from the BIOS, which points to a connection or hardware fault. If it is in Disk Management but not File Explorer, the cause is almost always a missing drive letter, an offline disk or an unreadable file system.

Disk Detector looks for every drive connected to your PC, including ones File Explorer will not show, and tells you which of these causes applies: no drive letter, not initialized, offline, unallocated, unreadable file system, a driver problem or not detected at all. Fixes that are safe, such as assigning a drive letter, run in one click, and anything that could affect data is clearly marked before you choose it.

Quick decision guide

  • Healthy but no letter: assign a drive letter. Safe.
  • Offline: bring it online. Safe.
  • Not Initialized on a drive that had data: stop. Recover first.
  • RAW: stop. Recover first, then format.
  • Unallocated on a drive that had data: stop. The partition may be recoverable.
  • No Media or Unreadable: check the connection and drive health before anything else.

Frequently asked questions

What does Healthy (Primary Partition) mean?

The partition is readable and working. It does not mean the drive's hardware is healthy, which needs a SMART check.

What does No Media mean in Disk Management?

Windows sees the reader or USB bridge but no storage behind it, as with an empty card reader or a dead flash drive.

What is a Foreign disk?

A dynamic disk moved from another PC. Import it to use its volumes.

Get three guides like this every month, plus software update notices.Subscribe →