To back up a failing hard drive, copy your most important files first, in small batches, to a different healthy drive, and avoid anything that makes the failing drive work harder than it must: no chkdsk, no defragmenting, no full antivirus scans and no repeated restarts. Use a copy method that skips unreadable files instead of stalling on them, such as robocopy with low retry settings. If the drive is clicking, grinding or no longer detected, stop and contact a data recovery service instead, because every extra hour of use can reduce what can be saved.
A failing drive may give you hours, days or months. You cannot tell which, so treat the first copy as the one that counts.
First, decide whether to do this yourself
| Situation | Recommendation |
|---|---|
| SMART warning, drive otherwise working normally | Back up yourself, now |
| Some files will not open, drive still responds | Back up yourself, carefully, most important files first |
| Drive freezes or disappears now and then | Back up yourself in short sessions; stop if it gets worse |
| Clicking, grinding, beeping or burning smell | Power off; use a professional recovery service |
| Not detected at all | Professional recovery service if the data matters |
If you are not sure the drive is failing, check our guide to the signs your hard drive is failing. If it is making mechanical noises, read what a clicking hard drive means before going any further.
Get ready before you start copying
- Get a healthy destination drive with more free space than the files you need to save. An external hard drive or SSD is ideal. Never copy files to another partition on the same failing drive.
- Make a list of what matters most. Typically: Documents, Desktop, Pictures, Videos, any work or project folders, email data files, browser bookmarks and saved passwords, and anything you cannot download again.
- Stop background activity. Pause cloud sync, backup software and Windows Update, and close programs you do not need.
- If the failing drive is your C: drive, consider removing it and connecting it to another PC as a secondary drive with a USB-to-SATA adapter. That way Windows is not running from the drive while you copy, which reduces the load on it a great deal.
Copy the most important files first
File Explorer works for small amounts of data on a drive that is still mostly healthy. Its weakness is that it can stall for a long time on one unreadable file, then ask you what to do. On a struggling drive, that wastes the drive's remaining life on a file you may never get back.
robocopy, built into Windows, handles this better. Its default is to retry a failed file a million times, so set the retries low:
- Right-click Start and choose Terminal (Admin).
- Run a command like this, adjusting the folders:
robocopy "D:\Users\Sam\Pictures" "E:\Rescue\Pictures" /E /R:1 /W:1 /XJ /LOG:E:\Rescue\pictures-log.txt - Repeat for each important folder, one at a time, most important first.
- When each run finishes, open the log file and look for lines marked ERROR. These are the files that could not be read.
What the switches do: /E copies all subfolders, /R:1 retries a failed file once, /W:1 waits one second between tries, /XJ skips folder shortcuts (junctions) that can send robocopy in loops inside user profiles, and /LOG saves a report. robocopy only copies files that are new or changed, so if the drive drops out, you can run the same command again and it picks up where it left off.
Leave the hardest files for last. Once everything readable is safe, you can try the failed files again individually. Some will read on a second attempt; some will not.
What to avoid on a failing drive
- chkdsk /f or /r. Repairs change the file system and can remove damaged data, and a /r scan reads every sector. Run it, if at all, only after your files are safe. Our guide to running chkdsk explains the switches.
- Defragmenting or optimizing. It moves huge amounts of data around.
- Full antivirus scans and search indexing. Both read the whole drive.
- Repeated restarts and power cycles. Spin-up is one of the hardest moments for a weak drive.
- Installing recovery software on the failing drive. Install it on a different drive, and save recovered files elsewhere.
- Copying everything at once. Big unsorted copies spend time on things you do not need, like system files and caches.
Cloning or imaging the whole drive
If you need the whole drive, for example to keep Windows and all your programs, a full clone or disk image is the alternative to copying files. Cloning reads every sector, so it puts more load on the drive than copying a few folders. On a drive with bad sectors, ordinary cloning tools may stop at the first error. Imaging tools designed for damaged drives read the healthy areas first and come back to the problem areas later, which saves the most data in the least time. Copy your most important files first, then clone if the drive is still holding up.
Check what you saved
Do not wipe or throw away the failing drive until you have checked the backup. Open a sample of photos, documents and other files from the destination drive. Compare folder sizes with the originals. Read through the robocopy logs for anything that failed, and decide whether those files matter enough to send the drive to a recovery service.
Know which drive is at risk
The hardest part is often knowing that a drive is failing before files start disappearing. Disk Detector reads the SMART health of every drive in your PC and rates each one Good, Caution or Bad, with plain-English reasons such as rising reallocated sectors and clear advice like "back up this drive now". Its checks are read-only, so looking does not put the drive at risk.
With background checks turned on, Disk Detector warns you with a desktop alert as soon as a drive shows warning signs, overheats or runs low on space. That gives you time to back up calmly, rather than in a rush after the drive has already started dropping files. If files are already lost, Disk Detector cannot bring them back; that is a job for a recovery tool such as our separate product Drive Restorer.
Afterward: replace the drive and set up backups
- Replace the failing drive. Do not keep using it for anything important.
- Restore your files to the new drive.
- Set up automatic backups, such as File History in Control Panel → System and Security → File History, or a backup program that copies to an external drive on a schedule.
- Keep at least two copies of anything important, ideally one stored away from your PC.
Frequently asked questions
Should I run chkdsk before backing up a failing drive?
No. Copy your important files first. chkdsk /r stresses a weak drive and can move or remove damaged data.
Is it better to clone a failing drive or copy files?
Copy your most important folders first, since that is quickest. A full clone or disk image is better when you need everything, including the system.
When should I stop trying to copy files myself?
Stop if the drive clicks, grinds, disappears repeatedly or gets slower with every attempt. A recovery lab has a better chance with a drive that has not been pushed further.
