Disk Detector
Windows 10 & 11 Buy license · $29.95
Drive health

How to Check Hard Drive Health in Windows 11 and Windows 10

How to check hard drive health in Windows 11 with built-in tools and SMART data, what each result means, and when a drive needs backing up or replacing.

Updated 5 minute read The Disk Detector team

To check hard drive health in Windows 11, you need to read the drive's SMART data, the health log that every modern hard drive and SSD keeps about itself. Windows gives you three partial ways to see it: a Drive health panel in Settings (NVMe SSDs only), the Get-PhysicalDisk command in PowerShell, and a basic drive status in Security and Maintenance. None of them explains what the numbers mean, so this guide shows you each method, what the results tell you, and when a result means you should back up today.

Everything here works in Windows 10 too, with small differences in the Settings menus that are noted below.

Method 1: Drive health in Settings (NVMe SSDs)

Windows 11 has a built-in health view, but it only appears for NVMe SSDs. Hard drives and SATA SSDs do not show it.

  1. Open Settings → System → Storage.
  2. Click Advanced storage settings, then Disks & volumes.
  3. Select the drive and click Properties.
  4. Scroll to Drive health.

You will see an estimated remaining life percentage, available spare and temperature. If the drive has a problem, Windows may also show a warning such as reliability being degraded. In Windows 10 the same panel is under Settings → System → Storage → Manage Disks and Volumes.

This is a good quick check for a modern laptop, but it leaves out hard drives and SATA SSDs entirely, and it does not show error counts.

Method 2: PowerShell

PowerShell can query every drive Windows can see. Right-click Start, choose Terminal (Admin), and run:

Get-PhysicalDisk | Select-Object FriendlyName, MediaType, HealthStatus, OperationalStatus

Each drive is listed with a HealthStatus of Healthy, Warning or Unhealthy. For more detail, run:

Get-PhysicalDisk | Get-StorageReliabilityCounter | Select-Object DeviceId, Temperature, Wear, ReadErrorsUncorrected, PowerOnHours

The DeviceId matches the disk number in Disk Management. Wear is the percentage of an SSD's rated life that has been used, and ReadErrorsUncorrected counts reads the drive could not recover. Do not be surprised by blank fields: what appears depends on the drive and its driver, and many hard drives report very little here.

Older guides tell you to run wmic diskdrive get status. WMIC is deprecated and has been removed from current Windows 11 releases, so that command may simply not exist on your PC. Use the PowerShell commands above instead.

Method 3: Security and Maintenance

Open Control Panel → System and Security → Security and Maintenance and expand Maintenance. Under Drive status you will usually see "All drives are working properly". This reflects file system problems and SMART failure flags that Windows has noticed. It is a useful sanity check but it is a single on or off signal, and it often only changes once a drive is already in serious trouble.

What chkdsk does and does not tell you

Many people run chkdsk to "check the hard drive". It is a valuable tool, but it checks the file system, the structure that keeps track of your files, rather than the drive hardware. A drive can pass chkdsk while its SMART data shows it is wearing out, and a healthy drive can have file system errors after a power cut. Use both, for different things. Our guide to checking a hard drive for bad sectors explains when a surface scan is the better test.

How to read the results

The built-in tools mostly give you a summary word. Underneath, a drive's SMART log contains dozens of values. These are the ones that matter most:

ValueDrive typeWhat a bad sign looks like
Reallocated sectorsHard driveAny count above zero, especially if it grows
Current pending sectorsHard driveAny count above zero
Uncorrectable errorsAllAny count above zero
Percentage used / wearSSD, NVMeApproaching 100 percent
Available spareNVMeFalling toward its threshold
TemperatureAllRegularly high under normal use
CRC errorsSATARising count, often a cable problem

For the full list and what each value means, see SMART attributes explained. SSDs have their own wear values, covered in our guide on how to check SSD health.

A good rule of thumb: the absolute number matters less than the trend. A drive with two reallocated sectors that stays at two for a year is far less worrying than one that went from zero to forty in a month.

A faster way to check every drive

The built-in methods work, but they are spread across three different places, they skip some drive types, and they leave you to interpret raw numbers. Disk Detector reads the SMART data from every hard drive, SATA SSD and NVMe drive in your PC and turns it into a simple Good, Caution or Bad rating, with the exact reasons in plain English and what to do next.

It also shows drive temperature and, for SSDs, how much rated life has been used with an estimate of how long is left. If you plug in an external drive whose USB enclosure does not pass SMART data through, Disk Detector tells you, rather than leaving a blank field you might mistake for a healthy result. You can save or print a full health report for every drive as PDF or text.

What to do if a drive shows a warning

  1. Back up first. Copy your most important files to another drive or to cloud storage before you run any long scans or repairs.
  2. Check again in a few days. Note the reallocated, pending and error counts and compare them. Rising numbers mean the drive is getting worse.
  3. Check the cable for CRC errors. A rising CRC count on a desktop drive is often fixed by replacing the SATA cable.
  4. Plan the replacement. A drive with growing bad sector counts or an SSD near the end of its rated life should be replaced, not repaired.

Not sure whether what you are seeing is serious? Our guide to the signs a hard drive is failing covers the noises, slowdowns and errors to watch for alongside the SMART data.

How often to check

For most home PCs, a quick health check once a month is enough. Check more often if a drive is more than four or five years old, runs warm, has shown any warning before, or holds files that are not backed up anywhere else. Better still, let a tool check in the background so you hear about a problem the day it starts, rather than the day you remember to look.

Frequently asked questions

Does Windows 11 have a built-in hard drive health check?

Partly. Settings shows a drive health section with estimated remaining life for NVMe SSDs only, and PowerShell can show basic reliability counters. Hard drives and SATA SSDs get much less detail.

Is wmic diskdrive get status still available?

WMIC is deprecated and is removed on current Windows 11 releases, so the command may not exist on your PC. Use the PowerShell command Get-PhysicalDisk instead.

How often should I check my hard drive health?

A quick SMART check once a month is sensible for most PCs, and more often for drives that are old, run hot or hold files you have not backed up.

Get three guides like this every month, plus software update notices.Subscribe →